一本大道道香蕉a高清_亚洲午夜福利av一区二区无码_又黑又长又粗欧美在线视频_97人妻在线视频网_老司机67194熟妇在线播_国产香蕉久久_heyzo加勒比中文字幕_欧美性生活视频网站_日本黃色三級片a做愛电影免费看_一级片好看中文字幕

Polyurethane foaming machineCommon faults of mixing head and their solutions

Malfunction of hydraulic system:

1. There is injection signal but no injection.

2. There is a sweep signal and the head piston does not move.

Fault phenomenon of electrical system:

1. Proximity switch fault.

2. Fault of intermediate relay.

3. Fault of proximity switch plug.

Failure of raw material system:

1. The injection amount of raw materials is less or more than the prescribed injection amount.

2. The foaming speed is accelerated.

Polyurethane foaming machine Fault analysis and countermeasures:

1. With injection signal and without injection:

Reason: a. no action of the injection head or no action of the injection head proximity switch.

B. the material injection port is blocked.

Countermeasures: a. Check whether the injection head proximity switch is normal.

B. check whether the action of the solenoid valve of the injection head is normal.

C. Check whether the intermediate relay of the injection head solenoid valve is normal.

D. check whether the raw material injection port is blocked.

2. No movement of head cleaning:

Reason: a. the solenoid valve of cleaning head fails.

B. the cleaning head is stuck in the sponge.

Countermeasures: a. Check whether the intermediate relay of cleaning head solenoid valve is normal.

B. check whether the solenoid valve of the cleaning head is normal.

C. Check whether the cleaning head is filled with sponge.

3. Proximity switch fault:

Reason: a. failure of proximity switch.

B. the plug of proximity switch fails.

Solution: replace proximity switch or plug.

4. The injection amount of raw materials is less than the prescribed injection amount:

Cause: high and low pressure switching valve loop leakage.

Countermeasures: clean the high and low pressure switch valve and replace the seal.

5. The injection amount of raw materials is more than the prescribed injection amount:

Reason: a. the pressure regulating part of injection nozzle fails.

B. sealing failure of injection nozzle.

Countermeasures: replace injection nozzle pressure regulator or seal.